|
scheda tecnica:
Features and Benefits
* Up to 32 ports for high density environments
* Any Baudrate supported with high precision
* Port buffers for storing serial data when the Ethernet is off-line
* SD slot for expanding port buffer memory
* Slot for network expansion module
Overview
The NPort® 6600 series of secure device servers is the right choice for applications that use large numbers of serial devices packed into a small space. If you're worried about security, you can rest assured with the NPort® 6600, since it supports DES, 3DES, and AES, the three most common standards for data encryption. Serial devices of any type can be connected to the NPort® 6600, and each serial port on the NPort® can be configured independently for RS-232, RS-422, or RS-485 transmission.
LCD Panel Makes Configuration Easy
The NPort® 6600 has a built-in LCD panel for configuration and selecting operation modes. The panel displays the server name, serial number, and IP address, and any of the device server's configuration parameters, such as IP address, netmask, and gateway address, can be updated easily and quickly.
Adjustable Resistor Values for RS-485 Communication
The NPort® 6600 provides adjustable termination, pull high, andpull low resistors for RS-485 communication. In some criticalenvironments, termination resistors may be needed to prevent thereflection of serial signals, and the pull high and pull low resistors mayneed adjusting to maintain the integrity of the electrical signal. Since no set of resistor values works for every environment, the NPort®6600 allows manual adjustment of the resistor values for each serialport using built-in DIP switches.
• Ethernet Interface (built-in)
No. of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector(s) 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in
• Optical Fiber Interface (with network module)
Fiber Port(s) 100BaseFX, SC connector
Distance
Multi-mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
Min. TX Output
Multi-mode: -20 dBm
Single-mode: 0 to 40 km, -5 dBm
Max. TX Output
Multi-mode: -14 dBm
Single-mode: 0 to 40 km, 0 dBm
Sensitivity
Multi-mode: -34 to -30 dBm
Single-mode: -36 to -32 dBm
• Serial Interface
Serial Standards
NPort 6610: RS-232
NPort 6650: RS-232/422/485
Number of Ports 8, 16, or 32
Connector(s) 8-pin RJ45
RS-485 Data Direction Control ADDC™ (automatic data direction control)
Console Port Dedicated RS-232 console port on rear panel (8-pin RJ45)
ESD Protection 15 KV ESD protection for all signals
• Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, DTR/DSR, XON/XOFF
Baudrate 50 bps to 921.6 Kbps
• Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
• Memory Expansion Slot
Slot Type SD socket
• Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, HTTPS, SMTP, ARP, SSH, SSL, PPPoE, DDNS
Security Protocols DES, 3DES, AES, SSH, SSL, HTTPS, RADIUS, PAP, CHAP, TACACS+
Driver Support Windows Real COM drivers (for Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64), Linux Real TTY driver, Fixed TTY drivers (for SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i)
Configuration Options Web Console, Serial Console, Telnet Console, Windows Search Utility
• Physical Characteristics
Enclosure SECC sheet metal (1 mm), IP30 protection
Weight
NPort 6600-8: 3460 g
NPort 6600-16: 3580 g
Dimensions
Without ears: 440 x 195 x 44 mm (17.32 x 7.68 x 1.73 in)
With ears: 480 x 195 x 44 mm (18.9 x 7.68 x 1.73 in)
• Environmental Limits
Operating Temperature 0 to 55°C (32 to 131°F)
Operating Humidity 5 to 95% RH
Storage Temperature -20 to 70°C (-4 to 158°F)
Surge Protection 15 KV ESD protection embedded
• Power Requirements
Input Voltage AC Models: 100 to 240 VAC
DC Models: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Power Consumption AC Models: 285 mA @ 100 VAC, 190 mA @ 240 VAC
DC Models: 293 mA @ 48 VDC
Power Line Protection 1 KV burst (EN61000-4-4: EFT/B), 0.5 KV surge (EN61000-4-5)
• Regulatory Approvals
Safety UL (UL60950-1), TÜV (EN60950-1)
EMC CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A
EN61000-4-2 (ESD) 4 KV contact
EN61000-4-4 (EFT) 1 KV power
EN61000-4-5 (Surge) 2 KV power
• Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
• Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
|
