PERCORSO: >> Industrial ethernet switches >> rackmount ethernet switches

PT-7324-F-LV, Smart Switch System with 1 slot for 100 Mbps modules, 1 slot for Gbps module, Ethernet ports on front panel, LED display on front panel, with one power supply of 9-60 VDC, for a total of 24 ports

Features and Benefits

* IEC 61850-3, IEEE1613 (power substations), NEMA TS2 (traffic control systems), and EN50121-4 (railway applications) compliant
* Port-based VLAN to enhance security/network performance and ease network planning
* 802.1p priority queues and port-based QoS to increase determinism
* Smart web-based management makes configuration easy
* Universal power supply range, 24/48 VDC or 110/220 VDC/VAC
* -40 to 85°C operating temperature range
* Broadcast storm filtering

Introduction

The PowerTrans PT-7324 smart switch is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE1613), traffic control systems (NEMA TS2), and railway applications (EN50121-4). ThePT-7324 is also equipped with smart features, "Class of Service" features suitable for multimedia applications, and port-based VLAN features that can be used to segment your network without being restricted by physical connections. If you do not want to receive too many broadcast packets, the broadcast storm filtering feature will discard broadcast packets if the number of such packets exceeds a threshold in a preset period of time.

This product supports expansion modules.

• Technology:
Standards IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1p for Class of Service
Flow Control IEEE 802.3x flow control, back pressure flow control

• Switch Properties:
Priority Queues 2
Max. Number of Available VLANs 24

• Interface:
RJ45 Ports 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode and auto MDI/MDI-X connection
Fiber Port(s) 100BaseFX (SC/ST connector) or 1000BaseSFP slots
*Slot 1 for 2-port PM-7200 Gigabit Ethernet combo module, or 2- or 1-port PM-7200 fast Ethernet modules
Fast Ethernet
Gigabit Ethernet
LED Indicators STAT, PWR1, PWR2, FAULT, LNK/ACT, FDX/HDX, SPEED
Alarm Contact One relay output with current carrying capacity of 3A @ 30 VDC or 3A @ 240 VAC

• Power Requirements:
Input Voltage 24/48 VDC (9 to 60 V), or 125/250 VDC (88 to 300 V) and 110/240 VAC (85 to 264 V)
Input Current Max. 0.68A @ 24 VDC
Max. 0.35A @ 48 VDC
Max. 0.17/0.11A @ 110/220 VDC
Max. 0.33/0.23A @ 110/220 VAC
Overload Current Protection Present
Connection 10-pin terminal block
Reverse Polarity Protection Present

• Physical Characteristics:
Housing IP30 protection
Weight 4700 g
Dimensions 440 x 44 x 254 mm (17.32 x 1.73 x 10.00 in.)
Installation 19" rack mounting

• Agency Approvals:
EMI FCC Part 15, CISPR (EN55022) class A
Safety EN60950-1 (Pending)
Maritime DNV (Pending), GL (Pending)
Road Traffic NEMA TS2
Rail Traffic EN50121-4 (Pending)
Power Automation IEC 61850-3, IEEE 1613

• Environmental Limits:
Operating Temperature -40 to 85°C (-40 to 185°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

• Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty