PERCORSO: >> Video networking products >> industrial video servers

VPort D351, 1-ch MPEG4/MJPEG Industrial Video Decoder

Features and Benefits

* Decode MJPEG and MPEG4 video streams to analog video signal automatically
* Manual selection or automatic scan with maximum of 64 video sources
* 2-way (1 in/1 out) audio supported
* Supports transparent PTZ control with legacy PTZ controller
* Supports SNMP for network management

Introduction

The VPort D351 is a 1-channel video decoder for decoding MPEG4/MJPEG video streams from VPort series video encoders (not including VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310) and VPort IP cameras back to analog video signals. The analog video signal can be sent to legacy CCTV devices, such as monitors,multiplexers, and matrix switches, which can be used as originally intended as part of CCTV systems. In addition, bi-directional audio enables ready-to-use voice over IP communication between the video encoder and decoder. Monitoring cameras that are part of large CCTV systems is easy with the VPort D351, which can be set up to switch between different video sources either manually or automatically within a given time interval. Up to 64 video sources can be included in the list. In addition, the 2DIs located on the top panel of the VPort D351 can be used to create 2 control buttons for up and down video source selection.

• Video:
Video Inputs Video streams from VPort series video encoders and VPort IP cameras over TCP/IP networks (not including VPort 2110, VPort 2140, VPort 2310, VPort 2141, and VPort 3310)
Video Outputs 1, BNC connector, NTSC or PAL
Video Viewing:
- Max. 30/25 FPS (NTSC/PAL) can be decoded
- OSD (on-screen display) with video source, video source IP, date/time, and customized information
Video Decoding MPEG4, MJPEG (Auto detecting)
Video Source Up to 64, selected manually by web server or digital inputs, or selected automatically by scanning within a set time interval
Resolution Max. 540 TVL line

• Audio:
Audio Input 1 Line-in port; 1 Mic-in port
Audio Output 1 Line-out port
Audio Decoding PCM, Mono
Audio Encoding PCM, Mono

• Network:
Protocols TCP, UDP, HTTP, SMTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, and SNMPv1/v2c/v3
Ethernet 1 RJ45 port, 10/100BaseT(X) auto negotiation

• Serial:
PTZ Port 1, RS-232/422/485 terminal block connector, max. 115.2 Kbps baudrate
Console Port 1, RS-232 RJ45 port

• GPIO:
Digital Inputs 2, max. 8 mA
“High”: +13V to +30V
“Low”: -30V to +3V
Relay Outputs 2 (max. 24 VDC @ 1A)

• LED Indicators:
STAT Indicates if system booted up properly or not
PWR1 Power 1
PWR2 Power 2
Fault Can be configured to correspond to system alarm, power failure, video loss, or disconnected network

• Physical Characteristics:
Weight 910 g
Dimensions 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in.)
Installation DIN-Rail mounting, wall mounting (optional kit)

• Power Requirements:
Input Voltage 2 12/24 VDC and 24 VAC power inputs for redundancy

• Environmental Limits:
Operating Temperature 0 to 60°C (32 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

• Agency Approvals:
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 2
EN61000-4-12 (Oscillatory wave immunity), level 3
Safety UL508
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6

• Warranty:
Warranty Period 5 years
Details see www.moxa.com/warranty for details

• Others
Alarm Features: Automatically switch to the video source once an event is triggered
Pan/Tilt/Zoom: Transparent PTZ camera control with legacy PTZ controller through the RS-232/422/485 port
Security:
- User level password protection
- IP address filtering